Input connectors:
1x HDMI 1.4 (IN & LOOP)
1x HDMI 1.4
1x DVI (IN & LOOP)
1x DVI
1x 3G-SDI (IN & LOOP)
1x 10G optical fiber port (OPT1)
Output connectors:
10x Gigabit Ethernet ports
A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
2x Fiber outputs" "OPT 1 copies the output on 10 Ethernet ports.
OPT 2 copies or backs up the output on 10 Ethernet ports.
1x HDMI 1.3
For monitoring or video output:
Self-adaptive OPT 1 for either video input or sending card output
Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
Audio input and output
Audio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported
Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
3x layers
Adjustable layer size and position
Adjustable layer priority
Output synchronization
An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
Powerful video processing
Based on SuperView III image quality processing technologies to provide stepless output scaling.
One-click full screen display
Free input cropping
Easy preset saving and loading
Up to 10 user-defined presets supported
Load a preset by simply pressing one button
Multiple kinds of hot backup
Backup between devices
Backup between "Ethernet ports"
Backup between "input sources"
Mosaic input source supported
The mosaic source is composed of several input connectors of the same type.
Up to 4 units cascaded for image mosaic
Three working modes
Video Controller
Fiber Converter
Bypass
All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
3D function
Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
Pixel level brightness and chroma calibration
Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.
Multiple operation modes
Control the device as you wish via V-Can
NovaLCT or device front panel knob and buttons
V-Can Support
Genlock
Supports up to 3x layers
Memory for 10 presets
Cascading via USB possible
Display configuration without computer possible
Control via USB or LAN
Input connectors:
1x HDMI 1.4 (IN & LOOP)
1x HDMI 1.4
1x DVI (IN & LOOP)
1x DVI
1x 3G-SDI (IN & LOOP)
1x 10G optical fiber port (OPT1)
Output connectors:
10x Gigabit Ethernet ports
A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
2x Fiber outputs" "OPT 1 copies the output on 10 Ethernet ports.
OPT 2 copies or backs up the output on 10 Ethernet ports.
1x HDMI 1.3
For monitoring or video output:
Self-adaptive OPT 1 for either video input or sending card output
Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
Audio input and output
Audio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported
Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
3x layers
Adjustable layer size and position
Adjustable layer priority
Output synchronization
An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
Powerful video processing
Based on SuperView III image quality processing technologies to provide stepless output scaling.
One-click full screen display
Free input cropping
Easy preset saving and loading
Up to 10 user-defined presets supported
Load a preset by simply pressing one button
Multiple kinds of hot backup
Backup between devices
Backup between "Ethernet ports"
Backup between "input sources"
Mosaic input source supported
The mosaic source is composed of several input connectors of the same type.
Up to 4 units cascaded for image mosaic
Three working modes
Video Controller
Fiber Converter
Bypass
All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
3D function
Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
Pixel level brightness and chroma calibration
Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.
Multiple operation modes
Control the device as you wish via V-Can
NovaLCT or device front panel knob and buttons
V-Can Support
Genlock
Supports up to 3x layers
Memory for 10 presets
Cascading via USB possible
Display configuration without computer possible
Control via USB or LAN
